Software quality assurance as an investment in reducing defect-related costs
Blog

The cost of a defect: why QA investments pay off multiple times

Defect costs reach beyond the repair bill. Learn how early testing and maintained checks reduce recurring losses, and how to calculate the return.
30 October 2026
QA consulting
Test automation
a1qa logo in black lowercase letters on white background
Article by a1qa
a1qa

After a production defect has been fixed, the business may still be paying for it. Refunds take time to process, and an emergency release leaves planned development unfinished.

In Tricentis’s 2026 Quality Transformation Report, 45% of respondents estimated annual losses of US$500,000–US$1 million from poor software quality. The survey also identified security and compliance failures, along with technical debt and rework, among the leading contributors to these losses. Its vendor-sponsored Censuswide survey covered 2,501 respondents. These are respondents’ own loss estimates.

A board reviewing QA spending needs a calculation tied to its own losses. Early requirements work addresses costly misunderstandings, while maintained tests check subsequent releases. The financial case rests on how much recurring loss those activities prevent against their implementation and upkeep costs.

The bill for a production failure

An error in payment logic is a defect. Duplicate charges are one way it causes a service failure. Engineers correct the code while finance investigates affected transactions and support handles complaints. Their recovery work belongs in the cost calculation.

A payment gateway outage creates a different loss. For a hypothetical retailer receiving 20,000 orders an hour at US$100 each, an hour without checkout puts US$2 million in order value at risk. Lost revenue depends on subsequent purchases and alternative payment methods. Contribution margins and additional recovery costs reveal the profit effect.

Service-level agreement penalties add to the bill where applicable. Negative coverage also creates reputational exposure, although a financial valuation needs supporting data.

In a March 2025 notice, the US Food and Drug Administration classified a correction involving BD Alaris Systems Manager and BD Care Coordination Engine Infusion Adapter software as its most serious recall type because of incorrect therapy risk, with no reported injuries or deaths.

Where failures threaten safety or compliance, legal specialists should evaluate potential fines and litigation alongside recovery costs.

Earlier intervention and repeated benefits

Resolving an unclear requirement before dependent features are built avoids revisiting completed work. Shift-left testing brings those reviews into planning, where teams can agree expected behaviour before implementation spreads across components.

In a1qa’s home-appliance project, incomplete user stories had led to critical defects late in development. a1qa joined planning activities to clarify expected system behaviour and helped standardise QA processes across multiple teams.

The clarified rules also guide later features. Turning them into regression checks gives subsequent releases a repeatable way to catch familiar mistakes. Keeping scenarios and test data current sustains that benefit as the software changes.

In the same project, automation cut release verification testing time by 90%, while separate performance work reduced download time by 30%.

Shorter verification frees testing capacity. To determine whether it also shortens delivery, track change lead time from the DevOps Research and Assessment (DORA) programme: the interval from committing a change to deploying it in production. Other approvals and unfinished development still influence the launch date.

A method for choosing where to invest

Risk-based testing starts with incident costs grouped by cause. Teams then identify which causes testing addresses and where prevention offers the largest avoidable savings. Severe scenarios and compliance duties also influence priorities, even when past incidents are rare.

Requirements-related failures point towards shift-left reviews. Repeated regressions call for better automation coverage and test data. Production monitoring helps detect escaped defects, while rehearsed recovery limits disruption. For retailers, performance regression tests repeat promotional traffic after software changes to expose bottlenecks before the next campaign.

Some regulated businesses have specific testing duties. The UK Financial Conduct Authority’s (FCA) March 2026 observations reiterate that firms within its operational resilience rules need testing plans covering severe but plausible disruptions. This wider testing spans operational dependencies beyond software QA.

Customer follow-up strengthens prioritisation. Comparing affected customers with similar unaffected groups helps investigate abandonment, churn and later purchases. Other influences need checking before attributing differences in retention or lifetime value to a software failure.

A break-even point and a two-year return

Suppose past incidents reveal US$400,000 in annual failure costs linked to unclear requirements and recurring regressions. A hypothetical QA programme costs:

  • Year one: US$150,000 for implementation and operation.
  • Year two: US$50,000 for continued operation and maintenance.
  • Total investment: US$200,000 over two years.

How much improvement would cover that investment?

With comparable exposure, the two-year failure-cost baseline is US$800,000. Preventing 25% of those costs saves US$200,000, covering the investment.

If the programme prevents 50% across the full two-year period, avoided costs reach US$400,000. That gives a 2× benefit-to-cost ratio, US$200,000 in net benefit and 100% net ROI. This is a scenario to test, with savings building as implementation progresses.

A pilot should determine which losses are preventable and whether the reduction and maintenance budget are credible. Its results provide a basis for proceeding, changing the scope or stopping work that fails to justify its cost.

Tracking the financial result

Operational indicators connect the financial calculation to the work:

  • Defect escape rate and root cause: Track production defects as a share of all defects identified for a defined release or period. Group them by cause and severity, then link incidents to costs to identify the losses being targeted.
  • Resolution and recovery time: Measure mean time to resolution (MTTR) from detection to a permanent fix, and record service restoration separately. Customer disruption time informs loss estimates. For deployment failures requiring immediate intervention, track DORA’s failed deployment recovery time.
  • Cost of Quality: Separate internal and external failure costs as the baseline, and count added prevention and appraisal spending as the QA investment, including implementation and upkeep.

Over 12–24 months, compare failure costs and QA spending with the forecast. Account for changes in traffic and release volume. Separate cash savings from staff time released for other work, and count each benefit once.

Conclusion

QA investments can pay off across releases when teams remove recurring failure causes and maintain the checks that catch them. Requirements clarified today guide tomorrow’s development, and maintained regression tests reduce repeated manual work. Those continuing benefits give the initial investment more opportunities to earn its cost back and generate a surplus.

Put the investment to work

With more than 20 years in software testing, a1qa’s QA consulting specialists help teams investigate recurring defects and improve testing workflows. Bring the most costly failure patterns to the team and agree a QA roadmap with clear costs and measurable outcomes.

More Posts

Ecommerce QA ensuring reliable payments, inventory accuracy, and seamless shopping experiences
15 October 2026,
by Automation Lab
5 min read
The business case for retail QA
Checkout failures, pricing errors, and disconnected store systems can cost retailers orders and repeat business. Retail QA identifies where these problems occur so teams can address them before they affect shoppers.
Functional testing
Performance testing
Quality assurance
Test automation
14 September 2026,
by Pavel Novik
7 min read
A well-thought-out QA strategy for launching gambling software across the globe
Discover crucial components of an effective digital casino game QA approach for achieving global reach with your gambling software.
Functional testing
Localization testing
Mobile app testing
Performance testing
QA consulting
QA in Gaming
Quality assurance
Test automation
Managing software quality and risks across multiple vendors
4 September 2026,
by AI Engineering Lab
5 min read
When every vendor passes but the product still fails
Individual vendors can meet their targets while the end-to-end service still leaves customers with a broken experience. Strong multi-vendor QA governance connects supplier commitments, testing, risk, and evidence around the end-to-end user journey.
Quality assurance
Test automation
Quality assurance team supporting regulatory compliance
21 August 2026,
by a1qa
7 min read
From audit readiness to continuous compliance: how QA enables regulatory resilience in 2026 
Software, infrastructure and regulatory requirements can all change between formal audits. Learn how QA helps teams retest affected controls, preserve audit evidence, and identify compliance gaps during software delivery.
QA consulting
Quality assurance
How scalable QA keeps super app platforms reliable and secure
16 July 2026,
by Automation Lab
6 min read
Super app testing: How QA keeps complex platforms reliable
Super apps bring payments, shopping, bookings, messaging, and support into one place. Explore how scalable QA keeps every service, integration, and customer journey working together.
Mobile app testing
Quality assurance
Test automation
How organizations successfully shift from QA to quality engineering
12 May 2026,
by Mike Urbanovich
6 min read
QA vs QE: How to transition to quality engineering in the age of AI
Quality is no longer something you test into a product. The organizations that understand this are already pulling ahead.
Functional testing
Quality assurance
Test automation
21 April 2026,
by Automation Lab
5 min read
Modern Selenium Grid alternatives: Playwright, Cypress, and Selenoid in 2026
Teams choosing an automation stack in 2026 need to weigh legacy code, infrastructure load, and the speed of feedback. This article helps them choose between Selenium Grid, Selenoid, Playwright, and Cypress.
Quality assurance
Test automation
27 March 2026,
by Automation Lab
5 min read
Mapping the investment horizon in test automation
Have a look at how to approach test automation to validate impact, optimize performance, and scale this practice across the entire organization with confidence.
Test automation
24 February 2026,
by Mike Urbanovich
5 min read
QA for cybersecurity resilience
Discover how embedding QA into your CI/CD pipeline reduces risk, ensures compliance, and strengthens resilience by turning security requirements into repeatable tests and release gates in the AI era.
Cybersecurity testing
Test automation

Get in touch

Please fill in the required field.
Email address seems invalid.
Please fill in the required field.
We use cookies on our website to improve its functionality and to enhance your user experience. We also use cookies for analytics. If you continue to browse this website, we will assume you agree that we can place cookies on your device. For more details, please read our Privacy and Cookies Policy.